|
The Prince of water in addition to E series General YSC-318, YSC-328, YSC-338, YSC-348
Product features:
1, infiltration, dissolution and strong, with the exception of La-speed quickly.
2, does not contain sodium hydroxide and inorganic salt, alkaline is extremely rare.
3, the use of low concentrations (1-3%), high capacity of oil, long life, the economy.
4, applies to a wide range of stainless steel products, copper products, alloy products can be used.
5, ultrasonic cleaning with hot-dip better.
Physico-chemical indicators:
|
Model |
Appearance |
Proportion |
PH value |
| YSC-318 |
Light yellow transparent thick liquid |
0.95±0.05 |
8.6 |
| YSC-328 |
Translucent light yellow thick liquid |
1.01±0.05 |
9.8 |
| YSC-338 |
Light yellow transparent thick liquid |
1.02±0.05 |
7.8 |
| YSC-348 |
Light yellow transparent thick liquid |
1.03±0.05 |
9.5 |
Application Guide:
Concentration :1-3%, (YSC-318, YSC-338).
2-4%, (YSC-328, YSC-348).
Temperature :60-80 ° C (the application of copper, aluminum and zinc alloy) ,80-95 ° C (applies to stainless steel, iron category).
1-time 10 minutes.
The use of the main points:
1, solution preparation: add water to clean the tank, heated to about 60 ° C, under stirring at slowly add the water required in addition to Prince, the Prince of water is more difficult because in addition to dissolution, the full mixing even after the required temperature to the required operating temperature to use.
2, solution maintenance: In addition to La-performance solution with the speed, can be calculated through the use of chemicals, in addition to the Prince to use their experience to add water to maintain, when the oil too much wax or solid, you need to replace the solution, the general replacement cycle for 2-10 days range.
3, For use with a slot for a variety of different media in addition to the Prince when the workpiece, it is necessary to pay attention to the order in addition to the Prince: First deal with active metals, and then do not deal with active metal. For example: zinc alloy in addition to first wax, or pieces of zinc alloy in addition to a layer of wax is formed on the surface of the replacement of copper combined with non-performing.
Performance Comparison:
YSC-318, YSC-338 belong to weak alkaline, moderate water-based general-purpose addition to the Prince, and its ability to dissolve oil-Prince, the effect of oil well, with small, long life and other characteristics, applies to stainless steel, iron, zinc alloy, aluminum products In addition to the Prince of the deal, YSC-338 Prince of aluminum products in addition to the effect of a very prominent, bright shiny cleaned workpiece.
YSC-328, YSC-348 highly alkaline, which is super-edge-type addition to the Prince of water, is ideal for stainless steel, iron and copper in addition to the Prince of treatment, such as stainless steel tableware, stainless steel strap, Case, lighting, metal frames, copper and so on. |
