E Product features:
1, infiltration, dissolution and strong, with the exception of the Prince faster.
2, does not contain sodium hydroxide and inorganic salt, alkaline is extremely rare.
3, the use of low concentrations of oil high capacity, long life, the economy.
4 for copper, iron and various alloy parts, such as copper, frames, etc. In addition to the best wax.
5, ultrasonic cleaning with hot-dip better.
Physico-chemical indicators:

Application Guide:
:3-5% concentration.
Temperature: Hot-dip 70-90 ° C, ultrasonic wash 50-80 ° C.
Time: -10 minutes 30 seconds.

The use of the main points:

1, solution preparation: add water to clean the tank, heated to about 50-60 ° C, under stirring at the required slowly add YSC-068 in addition to the Prince of water.

2, solution maintenance: In addition to La-performance solution with the speed, can be calculated through the use of chemicals, in addition to the Prince to use their experience to add water to maintain, when the oil too much wax or sewage solids, then the solution needs to be replaced.

3, if the YSC-068 with the exception of La-water type of zinc alloy and lively work, you need to pay attention to cleaning time should not be too long, cleaning temperature should not be too high, otherwise work will have on the phenomenon of light corrosion.

4, For use with a slot for a variety of different media in addition to the Prince when the workpiece, it is necessary to pay attention to the order in addition to the Prince: First deal with active metals, and then do not deal with active metal. For example: In addition to zinc alloy first Prince and then again for copper and its alloys. Not recommended for a large number of copper or its alloys and then to do after the treatment of zinc alloy handle, or pieces of zinc alloy in addition to a layer of wax is formed on the surface of the replacement of copper combined with non-performing.